Aquascan 6500 - Leak Locating Correlator

You are Here: Products > Leak Noise Correlators > Aquascan 6500

Features:

• Laptop based: Connects to the serial port of any laptop
• Easy handling under Windows
• Quick leak identification and accurate pinpointing
• High measurements resolution: 16,000 points
• Easier location of difficult leaks on plastic pipes
• Peak suppression facility
• Affordable: Excellent cost/performance ratio

AQUASCAN 6500 connects to any laptop PC
The correlator unit connects to the serial port of a laptop PC and automatically converts the laptop into a powerful, advanced leak correlator.

AQUASCAN 6500 is very easy to use
The correlator is supplied with an easy-to-use Windows-compatible software. After deploying the sensors, the user simply keys in the distance between the sensors, the pipe material and the pipe diameter and then starts the correlation.

High locating precision
The measuring resolution of 16,000 points allows a very accurate pinpointing (locating precision better than 1 cm per 100 m, or 1" per 1,000 ft).

Enhanced performance on PVC and MDPE pipes
While plastic pipes are often a problem for conventional correlators, the AQUASCAN 6500 has enhanced capabilities for more difficult, low noise and low frequency leaks.

Detailed on-screen information allows to adjust settings
With a simple mouse-click the user can pop-up additional windows displaying all details of the leak noise and frequency analysis. This allows the user to fine-tune all the standard settings to the specific conditions of any measurement, such as the filter setting to eliminate disturbing ambient noises.

Multi peak suppression eliminates interfering noise sources
The AQUASCAN 6500 also offers the possibility to suppress any correlation peak caused by disturbing non-leak sources, such as water consumption.

Automatic computation of the sound velocity
The AQUASCAN 6500 is capable of calculating the real sound velocity of a pipe section where the material or diameter is unknown.

Large memory
The number of stored correlations is limited only by the capacity of the hard disk of the laptop. All necessary correlation data including FFT and coherence is memorized, permitting subsequent off-site re-correlation of the measurements with new or changed parameters.

Comprehensive report and immediate print-out
A comprehensive report of the leak detection can be printed out on site, including a drawing of the site-plan with just a few simple mouse-clicks.

Excellent price/performance ratio
Even with its advanced features and the high performance, the AQUASCAN 6500 is very affordable and converts any laptop into a powerful, advanced leak correlator.

System configuration:

1 AQUASCAN 6500 correlator unit
2 Remote transmitter units
3 Antennae
2 High sensitivity piezo-ceramic sensors
1 Stereo headphones
1 Connecting cable to a 12 V vehicle cigarette lighter
1 100-240 Volt AC adapter
1 AQUASCAN 6500 software
1 Year warranty

Optional accessories:

2 Hydrophones
1 Car roof antenna

Pipe material:	All common pipe materials; mixed material mode with unlimited number of pipe sections
Sound velocity:	User-adjustable sound velocity table and automatic computation of the real on-site velocity
Measurement time:	3 sec. or more depending on distance and required accuracy
Correlation resolution:	16,000 points
Correlation accuracy:	1 cm for 100m (1” for 1 ,000 ft)
Correlation method:	16 bit amplitude correlation
Filter:	Automatically selected, manually infinitely adjustable
Frequency analysis:	FFT, coherence and user-defined frequency bands
Frequency response:	1-5000 Hz
Peak suppression:	unlimited, user-selectable
Sensors:	Extremely sensitive piezo-ceramic sensors with magnetic pipe fixing, sensitivity 10 V/g
Memory:	includes FFT and coherence data to enable post-processing of correlation with altered parameters
Reporting:	Full report of all measurement data, including manual drawing of site conditions
Power:	Rechargeable 12 V battery
Battery charging:	Vehicle or indoor
Battery charge life:	16 hours
Interfaces:	RS 232, sockets for antenna, battery charger and headphones
Dimensions:	Correlator and transmitter units: 22 x 19 x 9 cm (8.8 x 4.8 x 3.6") Sensors: 4.5 x 13 cm diameter (1.8 x 5" diameter)
Weight:	Correlator and transmitter units: 2.7 kg (5.9 lb.) Sensors: 0.75 kg (1.6 lb.)

find.more.leaks